See Your Race Body, Before and After

On-site 3D body scans for endurance events and teams. Spot hydration shifts, swelling, and asymmetry in minutes, so athletes recover smarter and coaches plan better.

Big efforts change bodies in ways tape, scales, and photos miss when fatigue hits hardest. Post-race debriefs rely on feel, not facts, leaving recovery, shoe fit, and training tweaks to guesswork. We capture a 3D baseline and immediate comparison so you see measurable changes, decide quickly, and protect tomorrow's legs.

92 seconds
Average scan time
Keeps lines moving without sacrificing useful detail at busy finish areas.
±1.3 mm
Surface resolution
Enough precision to spot subtle swelling and splay changes after hard efforts.
6.2 minutes
Report delivery speed
Most athletes receive a mobile link before they reach the snack table.
94%
Actionable insight rating
Athletes and coaches reported taking at least one immediate action post‑scan.
31% athletes
Asymmetry flags
Detected >2.5% left/right deltas worth addressing in the next training block.
−18.4%
Next‑day cramp reports
Teams reported fewer cramp incidents when using scan‑guided hydration and compression.
3.2 events
Events per rig, weekend
Portable setup supports multi‑day festivals and back‑to‑back races.
72% return
Repeat athlete scans
Most athletes come back for season baselines and pre‑A‑race checks.
The Challenge

You can’t manage what you can’t visualize after races

At the expo, you’re guessing: ankles feel puffy, quads feel cooked, your gait feels “off.” Coaches eyeball posture, med tents juggle triage, and athletes argue shoes and salts. By Monday, memories fade and training logs miss the why. The cost: slower recovery cycles, repeat niggles, and avoidable DNS next start line.

Finish-line choices rely on feel, delaying hydration and compression decisions when minutes matter most.
Photo comparisons hide small volume changes that spark hotspots and late-race cramping later on.
Tape measures are slow, inconsistent, and invasive on a crowded race day floor.
Teams miss asymmetries creeping over weeks, compounding into overuse injuries mid-season.
Athletes buy gear blind, wasting cash and miles on poorly matched fit and support.
The Solution

Turn post‑race guesswork into measurable, 3D evidence

The non-obvious truth: volume and posture shift rapidly under load—and tiny changes matter. Our on-site station builds a precise 3D model in about 90 seconds, then compares pre and post to flag swelling, asymmetry, and stance changes. Picture this: Sarah’s half-marathon shows a 1.8% lower‑leg volume rise and 3.2° foot splay; coach adjusts lacing and sodium, stopping next‑week hotspots before they start.

90–120 second scans produce millimeter-level surface resolution and segment volumes athletes can act on immediately.
Automated left/right comparisons flag >2.5% differences tied to niggles, guiding smarter load management.
Posture metrics quantify pelvic tilt and knee tracking, informing targeted mobility and strength work.
Shareable reports arrive in ~6 minutes, aligning athlete, coach, and medical staff decisions on-site.
Season-over-season baselines reveal trends, reducing repeat flare-ups and unnecessary gear experiments.
Our Story

Why we built this

RaceDay 3D started at a rainy marathon where our founder, an engineer‑coach, watched five athletes hobble into Monday with the same avoidable hotspots. The trigger: tape and photos told nothing precise. We prototyped a portable scanner, tested it at club time trials, and saw swelling patterns plain as day. Early events were messy—tight expo aisles, shaky power, nervous athletes—but the data kept proving useful. Within three months, teams were adjusting laces, socks, and sodium based on numbers, not hunches. We’ve since refined speed, privacy, and reporting so finish lines run smoother and bodies bounce back faster. Our mission is simple: make post‑effort changes visible so smart choices happen while they still matter.

What We Offer

Everything You Need

Fast, athlete‑friendly scanning in 90–120 seconds

Our booth guides athletes through a simple turn sequence and auto‑captures with minimal repositioning. Clear prompts and a single pass reduce redo rates and finish‑line friction.

Pre/post comparison with clear, actionable deltas

Side‑by‑side models quantify segment volumes, angles, and stance shifts. Color maps spotlight swelling and asymmetry, translating measurements into decisions in minutes.

Asymmetry flags tied to real thresholds

Default alerts trigger at >2.5% left/right deltas for limb volume and stance width. Customize thresholds by sport, distance, and athlete history.

Hydration and swelling indicators that guide care

Segment volume changes and splay metrics offer context for fluid strategy and compression use. Medical teams prioritize attention where the data points.

Privacy‑first capture and secure athlete profiles

No face capture, local encryption at the edge, and role‑based access protect sensitive information. Athletes control sharing with coaches and sponsors.

Season baselines and trend tracking over time

Link scans across events to track progress and recurring patterns. Coaches see when a shoe or strength block truly moves the needle.

Shareable reports for athletes and partners

Mobile‑friendly summaries include key deltas, heatmaps, and plain‑language notes. Export to PDF for med staff and upload to team portals in seconds.

On‑site crew optimized for busy expos

We arrive early, self‑contained, and power‑efficient. Line management and signage keep the flow smooth while sponsors get meaningful engagement.

Coach and med team dashboards

Filter athletes by risk flags, see deltas at a glance, and log immediate interventions. Everyone works from the same facts, not separate hunches.

How It Works

How It Works

1

Book your event slot

Tell us field size, venue layout, and schedule. We confirm logistics within 48 hours and share a simple run‑of‑show. You get sponsor‑ready assets and clear athlete instructions.

2

Capture a clean baseline

Athletes scan at bib pickup or pre‑race within a 10–15 minute window. The booth guides posture for consistency, easing pre‑race nerves with a quick, private flow.

3

Rescan at the finish

We position near recovery or med to keep transitions short. Most athletes complete post‑race capture in about two minutes, then receive a report link within minutes.

4

Compare, decide, and share

Coaches and med staff see flags immediately and act while athletes are still on‑site. Athletes leave with clear next steps and a shareable summary that reinforces the plan.

Testimonials

What People Say

Real experiences from people who trust us

“We used RaceDay 3D at both expo and finish. Medical triage prioritized flagged athletes and our response time dropped 23%. Sponsors loved it, but the real win was faster, calmer care.”

M
Marisa Chen
Race Director

“The post‑race foot splay numbers justified lacing changes and sock swaps. Hotspot reports fell 41% over six weeks. It’s finally something athletes understand and act on the same day.”

D
David K.
Head Coach

“My right‑left calf volume delta was 3.1%. I shifted tempo day load and added calf raises. Two races later my late‑miles fade improved by 2.3% on the same course.”

I
Irene Alvarez
Triathlete

“We no longer debate if swelling is ‘real.’ The color maps and thresholds speed decisions. We saw 17.6% fewer post‑event revisits for the same complaints.”

T
Tom W.
Physio Lead

“Season baselines showed my hip drop improved 2.8°. That validated our strength block. It’s not just cool visuals—our workouts got sharper and fewer niggles popped up.”

A
Ava Singh
Team Captain
Pricing

Pricing

Athlete Pass

$79/scan

Perfect for individuals at participating events. Get pre and post scans with a clear, mobile report.

One pre and one post scan
Mobile report with key deltas and heatmaps
Share with coach or physio in one tap
Privacy controls and data download
Priority line access at finish
Get Started

Race Day Package

$3,900/event

Bring a full station to your event. Great for expos, sponsors, and athlete care.

On‑site rig and two operators
Throughput tuned for your field size
Custom sponsor branding in reports
Medical/coach dashboards in real time
Pre‑race and finish‑line coverage
Data privacy and consent workflows
Get Started
FAQ

Frequently Asked Questions

Everything you need to know

What exactly do you measure? +

We capture a high‑fidelity 3D surface model and compute segment volumes, left/right deltas, and stance metrics like foot splay and pelvic tilt. We do not capture faces. The goal is to quantify meaningful changes from pre to post that inform recovery and coaching.

How long does a scan take on race day? +

Most athletes complete each scan in about 90–120 seconds. Reports typically arrive within 5–8 minutes. We design line flow and signage to keep queues moving even at peak finish times.

Is it private and secure? +

Yes. We avoid face capture, encrypt data at the edge, and restrict access by role. Athletes control sharing, can delete data on request, and receive a clear consent flow before any scan. We never sell personal data.

How is this different from a smart scale or photos? +

Scales give one global number and photos change with pose and lighting. Our 3D comparison shows where and by how much specific areas changed. That makes decisions about compression, hydration, and shoe fit much more precise.

What should athletes wear for scanning? +

Form‑fitting race kit works best. Avoid loose layers that hide body contours. Shoes can be on for stance measures or off for foot shape—your call, and we’ll note it to keep comparisons valid.

What if the event is crowded or outdoors? +

We built the rig for expos and finish areas. It’s compact, quick to set up, and uses minimal power. Our crew manages lines, and weather‑resistant panels keep scans consistent in variable light and wind.

What’s the ROI for organizers or teams? +

Events typically see faster triage and higher sponsor engagement. Teams report fewer next‑day cramps and clearer gear decisions. While results vary, many groups report a 10–25% reduction in preventable niggles across a block when using scan‑guided adjustments.

Is this right for me? +

If you coach, direct events, or race regularly, you’ll benefit from objective pre/post data. It might NOT be for you if you dislike data‑driven adjustments, rarely race, or prefer to keep all decisions on feel.

How much does it cost and what’s included? +

Individual scans start at $79 for a pre/post pair at participating events. Teams and organizers can book packages that include operators, dashboards, and sponsor branding. Every option includes privacy controls and report delivery on-site.

Can we integrate with our coaching or med tools? +

We offer exports (PDF and CSV) and a simple API for roster and results linking. Many teams start with PDF summaries, then adopt bulk exports for season tracking.

Interactive Tools

Tools & Resources

Interactive tools to help you get the most out of your business.

Ready to Get Started?

On-site 3D body scans for endurance events and teams. Spot hydration shifts, swelling, and asymmetry in minutes, so athletes recover smarter and coaches plan better.

Book race scanning
Generated by Aura | Back to Dashboard